# Save Money on Fuses with this Device

**Source:** Cary Hardy  
**Type:** video  
**Published:** 2020-11-03  
**Duration:** 2m 26s  
**Beat:** Pinball

**URL:** https://www.youtube.com/watch?v=aM6qP4_vc9I

---

## Analysis

Cary Hardy demonstrates a practical troubleshooting tool: a push-button 5-amp slow-blow circuit breaker (~$7) that can be temporarily wired into a pinball machine's fuse holder using alligator clips. This allows technicians to safely test for shorts and electrical faults without repeatedly blowing fuses during repair work, saving money and reducing frustration.

### Key Claims

- [HIGH] 5-amp slow-blow circuit breaker is the most common fuse type for pinball machines — _Direct statement about standard pinball machine fuse specification_
- [HIGH] A push-button circuit breaker device costs approximately $7 — _Explicitly stated price point for the tool_
- [HIGH] The device can be wired into a fuse holder using alligator clips on each side — _Demonstrated installation method with direct description_
- [MEDIUM] This method is more universal and easier than soldering terminals directly to fuses — _Opinion-based comparison of installation methods_

### Notable Quotes

> "blowing fuses one after the other starts to add up on cost"
> — **Cary Hardy**, early
> _Problem statement motivating the solution_

> "this seven dollar product can be utilized to keep you from spending more and more money on more and more fuses to help you troubleshoot your issue"
> — **Cary Hardy**, mid
> _Direct value proposition of the tool_

> "no more blowing fuses while you troubleshoot your issue"
> — **Cary Hardy**, end
> _Key benefit demonstration_

### Entities

| Name | Type | Context |
|------|------|---------|
| Cary Hardy | person | Pinball technician and content creator demonstrating troubleshooting techniques |
| 5-amp slow-blow circuit breaker | product | Push-button circuit protection device used as a troubleshooting tool for pinball machines |

### Topics

- **Primary:** Pinball machine troubleshooting and repair, Electrical fault detection, Cost-effective repair techniques
- **Secondary:** Technician tools and methods

### Sentiment

**Positive** (0.85) — Practical, solution-oriented tone focused on helping technicians save money and troubleshoot more efficiently

### Signals

- **[technology_signal]** Adoption of circuit breaker-based troubleshooting method as an alternative to traditional fuse replacement during diagnostic work (confidence: medium) — Demonstration of push-button circuit breaker as a practical tool for pinball technicians, suggesting emerging best practice in field repair methodology

---

## Transcript

 I think we've all been there at least once while working on a troublesome machine. We think we repair the problem, throw another fuse in there, rinse and repeat. And trust me, blowing fuses one after the other starts to add up on cost. and here it is right here this push button circuit breaker is a five amp slow blow which is your most common fuse for pinball machines this is going to solve all our problems when it comes to blowing fuses over and over again at least this seven dollar product can be utilized to keep you from spending more and more money on more and more fuses to help you troubleshoot your issue. Simply just use a couple of alligator clips, one for each side of your fuse holder. Then attach the other end of these alligator clips to the terminals on this device. Now I've seen people solder these terminals directly onto an already blown fuse You can if you want to I kind of like this method right here just makes it a little bit more universal and easier to get in and out of a machine now i going to set this down and make sure it's not touching anything else that's metal or conductive and then i'm going to cause a short right here on my gi strand for my backbox I just would have blown a fuse but instead all I need to do is just push that button on there bam no more blowing fuses while you troubleshoot your issue Outro Music

_(Acquisition: youtube_groq_whisper, Enrichment: v3)_

---

*Exported from Journalist Tool on 2026-04-13 | Item ID: 9dd53ed2-aadf-43fa-85d8-dadfd7316cf3*