# Arcade Game Project FAIL!

**Source:** RetroRalph  
**Type:** video  
**Published:** 2023-06-29  
**Duration:** 5m 39s  
**Beat:** Pinball

**URL:** https://www.youtube.com/watch?v=M__f_mC-gXE

---

## Analysis

RetroRalph discusses abandoning a non-functional Atari System 1 arcade cabinet project due to missing critical components (power brick, soundboard, harnesses) that he couldn't source despite extended effort. He converted it to a Road Blasters cabinet but lacks the pedal and yoke harness to complete it. Rather than continuing, he plans to sell or part out the machine, though he acknowledges another non-working System 1 is coming that will force him to revisit the problem.

### Key Claims

- [HIGH] Paid $700 for an empty Road Runner cabinet with no PCB or main board from Captain's Auctions — _Direct statement about the purchase and discovery that it contained nothing_
- [MEDIUM] Atari System 1 harness vendor on Etsy vanished and no other sources exist for System 1 harnesses — _RetroRalph states he cannot find anyone selling these harnesses currently_
- [MEDIUM] Converted the Atari power supply to switching power supply but couldn't get it working properly — _RetroRalph describes attempting the conversion but encountering issues_
- [HIGH] Galloping Ghost Reproductions produces reproduction artwork and parts including 3D printed components — _Named as company that reproduces unavailable arcade parts_
- [MEDIUM] Recently sold multiple arcade cabinets creating space for new projects — _RetroRalph references selling cabinets in past week or two to address viewer skepticism_

### Notable Quotes

> "I paid $700 for an empty Road Runner cabinet. Damn it. It's absolutely nothing."
> — **RetroRalph**, early in video
> _Expresses frustration over the core problem: purchasing what was advertised as complete but was entirely empty_

> "If I could bring it to the middle of the desert and blow it up, I probably would, but that would go against all of my restoration ethics."
> — **RetroRalph**, mid-video
> _Demonstrates extreme frustration while showing commitment to restoration ethics_

> "There was a guy on Etsy a while ago that used to produce wire harnesses for Atari System 1. I don't know where he went. He vanished. Poof, he's gone."
> — **RetroRalph**, mid-video
> _Identifies critical supply chain gap in the restoration community for specialized parts_

> "I'm throwing in the towel. And you know what, sometimes you just got to cut your losses."
> — **RetroRalph**, later in video
> _Decision point: admits defeat and accepts the loss rather than continue_

> "I definitely will revisit it because guess what, the Atari System 1 that's coming doesn't work."
> — **RetroRalph**, end of video
> _Reveals another System 1 project incoming, suggesting this issue will recur_

### Entities

| Name | Type | Context |
|------|------|---------|
| RetroRalph | person | Content creator documenting arcade restoration projects and failures |
| Captain's Auctions | company | Auction source where RetroRalph purchased the empty Atari System 1 cabinet for $700 |
| Galloping Ghost Reproductions | company | Arcade parts reproduction company that manufactures artwork and reproduction parts including 3D printed components |
| Atari System 1 | product | Early arcade machine platform with cartridge-based PCB system; subject of RetroRalph's abandoned restoration project |
| Road Runner | game | Atari game cartridge that was advertised in the cabinet RetroRalph purchased |
| Road Blasters | game | Atari game that RetroRalph converted the cabinet to run using a backup PCB he owned |

### Topics

- **Primary:** Arcade restoration challenges, Atari System 1 platform and components
- **Secondary:** Aftermarket parts sourcing and reproduction, Project management and loss-cutting decisions
- **Mentioned:** Arcade collecting and inventory management

### Sentiment

**Negative** (0.25) — RetroRalph expresses clear frustration and resignation about the failed project, though maintains some optimism about future attempts and demonstrates healthy perspective on cutting losses. Tone is somewhat self-deprecating but not hostile.

### Signals

- **[market_signal]** Arcade restoration parts market is fragmented and unreliable; critical components lack centralized distribution channels, forcing collectors to either find niche vendors or abandon projects (confidence: high) — RetroRalph explicitly states you cannot simply call '1-800-PARTS' or go to a website for System 1 components; must rely on scattered hobbyists and reproduction companies
- **[restoration_signal]** Existence of reproduction parts market (Galloping Ghost Reproductions) providing artwork and custom/3D-printed components as alternative to finding original parts (confidence: high) — Named example of company producing reproduction artwork and parts; generic mention of eBay hobbyists creating specialized parts like speaker grate overlays
- **[supply_chain_signal]** Critical gap in Atari System 1 harness availability; formerly available vendor on Etsy has disappeared, leaving no known source for these specialized components (confidence: high) — Direct statement: 'There was a guy on Etsy a while ago that used to produce wire harnesses for Atari System 1... He vanished. Poof, he's gone. And I can't find anybody selling Atari System 1 harnesses'

---

## Transcript

Hey guys, welcome back to the channel. In today's episode, we're gonna talk about projects I just can't complete. This looks like a Road Blasters, but this was actually an Atari System 1 Road Runner. The Atari System 1 has cartridges, PCB boards essentially, that you plug into a main board to add different games. I bought it as a Road Runner from Captain's Auctions, and if you guys remember, he basically said there was no PCB in it. Now to me, being someone that understands the System 1 architecture, I was thinking, no PCB could mean just the game and that the main board was in there. Well, if you watched the video, you found out there was nothing in it. It was an empty cabinet. So I paid $700 for an empty Roadrunner cabinet. Damn it. It's absolutely nothing. No, no, no. Oh, what did I buy? Oh, no. Well, this is where the main board would be. And this is where the cartridge would be. Now, why is it a Road Blaster's? Because I got so sick of trying to find an Atari power brick, I couldn't find one. And I couldn't find an Atari soundboard for this particular configuration. So I had no power brick, no soundboard. I had a lot of problems looking up documentation on how to convert these to a switching power supply. I did that, but I still can't find a soundboard, and I still can't find a power brick. I wanted to restore it back to its original form. So I happened to have a Road Blaster backup PCB because I infatuated with that game and I like I make it a Road Blasters Now I just like so sick and tired of this project because I don have a pedal and I don't have the harness to plug in the actual yoke, so it's like a total mess, man. There was a guy on Etsy a while ago that used to produce wire harnesses for Atari System 1. I don't know where he went. He vanished. Poof, he's gone. And I can't find anybody selling Atari System 1 harnesses, so I don't have the harness, I don't have the soundboard, I don't have the power brick, and I'm just done. If I could bring it in the middle of the desert and blow it up, I probably would, but that would go against all of my restoration ethics, if you will. I don't know what I'm going to do, but it's one of those projects where I think I'm just going to sell it off, part it out, and just be done. If someone wants an Atari System 1 cabinet, they can gladly have it, because I'm just done with it. There are sometimes projects where you just can't find the parts. But here's the cool thing. There are companies that make reproduction parts, Galloping Ghost Reproductions. they make artwork that can't be found, they'll reproduce it. Sometimes they'll reproduce parts if they have to, 3D printed and things like that. And there are just general hobbyists that will do that. You'll go on Clav and find someone saying, hey, I'm just doing a run of the metal overlay that goes over the speaker grate of like a Joust or a Defender or a Robotron. So there are people that do that, but it's not like you can go to like 1-800-PARTS and go get it or a website. So you kind of stuck in certain cases And this one it just been more hassle than it worth So I think I probably going to get rid of it I throwing in the towel And you know what Sometimes you just got to cut your losses So if someone wants a Road Blasters project and they want to custom make the harnesses and do all that, put your comments below and let me know because I will gladly ship this to you via Beltman or you can come pick it up locally because I'm done. Okay, I know what you're thinking. You're like, man, you gave up too soon. but you don't understand, I've been working on this for a long time. I got this at Captain's as a Roadrunner, and then I tried to make it a Roadrunner, but again, I was missing a power brick, and then I was also missing the soundboard. I finally found a soundboard, I couldn't find a power brick. I tried to convert the power on the Atari to run exclusively on the switching power supply, and I just, I couldn't get it working right. And so the fact that I paid so much for the cabinet overall, and I just couldn't get it working right, I'm like, you know what, sometimes you just don't want to look at stuff anymore and had all these other projects coming in I was like you know what I'm going to cut my losses but not all hope is lost because I don't know if you guys remember I have this thing for Atari System 1 especially Road Blasters I bought the Road Blasters upright then I sold it for the Road Blasters cockpit then I sold it and I might have another cockpit coming or not no no not a cockpit sorry sorry no never again on the cockpit it's way too big I have another upright coming So I don know You know what I taking the loss on this one It just was one of those things where it just didn work out for me and I got frustrated Maybe I revisit it Well actually I definitely will revisit it because guess what The Atari system one that coming doesn work So I'll be right back at it, but I'm going to figure it out. But the cool thing is, is I know in that last video, you guys were like, he's not going to sell anything. He's not going to. I sold so many arcade cabinets over the past, I don't know, week or two that I have plenty of room now to work on projects and I didn't get rid of any of my supposed holy grails right games that just I can't ever get rid of like Sinistar or Duck Hunt or Smash TV or Golden Axe or Afterburner I'm just kidding no there's I do I have a lot of games I like not getting rid of the games I absolutely love so don't worry plenty plenty gaming to be had so anyways if you enjoyed this video give me a thumbs up consider subscribing to the channel put your comments below are Are you bummed out that I gave up? Are you like, man, I wish you would have kept it? I don't know. It's too late now. That's it for now, guys. And we will see you on the next one.

_(Acquisition: youtube_groq_whisper, Enrichment: v3)_

---

*Exported from Journalist Tool on 2026-04-13 | Item ID: ccf5e816-434f-4f75-a339-5adf10ecbe5f*