Awesome Arcade1up Outrun AUDIO MOD - FEEL THE ENGINE RUMBLE!

RetroRalph·video·4m 59s·analyzed·Nov 25, 2020

Analysis

claude-haiku-4-5-20251001 · $0.016

TL;DR

DIY transducer mod adds rumble feedback to Arcade1Up OutRun cabinet

Summary

RetroRalph demonstrates installing a Dayton Audio tactile transducer (bass shaker) in an Arcade1Up OutRun cabinet to add rumble and haptic feedback to gameplay. The mod uses a 3.5mm splitter cable to route audio from the main PCB to both stock speakers and an amplifier-powered transducer mounted under the seat, with simple amplifier settings to control the effect.

Key Claims

Dayton Audio transducers are used in home theater to create rumble sensation from low frequency bass
high confidence · Opener explaining the principle of tactile transducers and how they work in various applications
The transducer lacks a traditional speaker diaphragm and transmits low frequency vibrations against the mounting surface
high confidence · Technical explanation of transducer construction and operation
RetroRalph has previously installed a similar transducer in a vertical pinball cabinet in his home
high confidence · Personal testimony: 'I have a vertical pinball cabinet in my house and I wanted to get that same rumble effect and I installed one in there'
The mod requires manual power on/off for the amplifier rather than automatic integration with cabinet power
high confidence · Explanation that both are plugged into normal wall outlets and amp must be powered separately
Older arcade games had superior sound systems that modern recreations lack without modification
medium confidence · Speculation: 'all these older arcade games just had awesome sound systems' as motivation for the mod

Notable Quotes

“You just want to feel it. Well, I have the solution for you. Let's feel it together.”
RetroRalph@ 0:12 — Sets up the video's premise and introduces the transducer solution
“The idea is that low frequency sound can be felt as well as heard.”
RetroRalph@ 0:57 — Explains the fundamental principle behind tactile transducers
“The only issue I have right now with this solution is the speaker wire... unless there was such thing as wireless speaker wire, but there isn't.”
RetroRalph@ 1:20 — Identifies a key limitation of the mod installation
“Your bass is gonna want to be all the way up. Your treble will be all the way down and you can play with the minimum maximum bass volume.”
RetroRalph@ 2:11 — Provides specific settings guidance for optimal transducer performance
“I'm telling you guys you should trust me on this one. It's gonna make a huge difference and you're really gonna like it.”
RetroRalph@ 3:09 — Personal credibility appeal based on prior experience with similar mod
“It's not so much making the room loud. It just making you feel it in the machine, in the one that using the machine now.”
RetroRalph @ benefit explanation — Clarifies that the effect is localized and personal to the machine operator

Entities

RetroRalphpersonDayton AudiocompanyArcade1UpcompanyOutRungame

Signals

?
product_strategy: Arcade1Up cabinets benefiting from third-party audio/haptic upgrades to address perceived gaps in stock audio quality
medium · Video framed as solution to missing sensory experience in modern arcade recreation products: 'these all these older arcade games just had awesome sound systems'
?
technology_signal: Tactile transducer mods becoming accessible aftermarket enhancement for home arcade cabinets to recreate immersive arcade experience
medium · RetroRalph presents this as a straightforward DIY mod with readily available components and simple installation process, suggesting growing accessibility of this modification

Topics

Arcade cabinet audio modificationprimaryTactile transducer/bass shaker installationprimaryArcade1Up cabinet customizationprimaryHaptic feedback in gamingsecondaryPinball cabinet modificationssecondary

Sentiment

positive(0.85)— RetroRalph is enthusiastic about the mod, presents it as a worthwhile enhancement, and endorses it based on personal experience. Tone is encouraging and supportive throughout, with only minor acknowledgment of limitations (wireless wiring, manual power control).

Transcript

youtube_groq_whisper · $0.015

Alright, so you just got your OutRun cab and you're like, but Ralph, it sounds good, but I want to feel it. I just want to feel it. You want to feel it, right? I know what you mean. You just want to feel it. Well, I've got the solution for you. Let's feel it together. Wait. You know what I mean. All right, so guys, we're going to dive right in. So what do I mean by feel it? Okay, so what you're going to do is you're going to install the Dayton Audio Transducer on the bottom of the seat. Now, people use these in home theater applications to make a rumble sound, you know, when you have big bass notes in movies and stuff like that. Now, what this thing is, is a tactile transducer or a bass shaker. So it's the idea that low frequency sound can be felt as well as heard. So the speaker inside here is lacking a diaphragm. So the shaker transmits low frequency vibrations up against the surface Now the only issue I have right now with this solution is the speaker wire You going to have a speaker wire that runs from the transducer bench to the amplifier I sorry I don't have a good solution for this unless there was such thing as wireless speaker wire, but there isn't. So you're just going to have to deal with that part of it. All right, so what else do you need to do? So the main PCB is right here. Now normally you'd have just your speaker wire hooked up directly to the PCB. We're going to need to install this splitter cable which actually takes one male end 3.5 millimeter and gives you two female ends on each side so one side is gonna go to the stock speakers and the other side is gonna go to the amplifier that's driving the transducer and the other end of this cables got two RCA jacks I'll have links to in the description of all of this stuff and what you'll need to do here is just take the other end of the speaker wire from the bass shaker and install it where it says super bass and you'll see there's a positive and negative so it's easy for you to match that up with the bass shaker and then on the front my settings are really pretty easy the volume could be max or minimum it doesn't matter that's actually not what controls the bass shaker your bass is gonna want to be all the way up your treble will be all the way down and you can play with the minimum maximum bass volume you can see where I have it there you know the more rumble feeling you want you can move it further up or or less you have to play between this and the volume setting on the arcade till you get it to your liking but it really easy once you get it going But that really all you need to wire it up on the back side And then this isn't a power solution, so they're both plugged into a normal wall jack, so the amp will need to be powered on and off manually. If someone could come up with a good solution for that, you know, give it a shot, you could hook it up to like an Alexa smart plug or something and have both of them hooked up and just say Alexa, turn on OutRun or whatever. So this isn't a solution for a single power on power off just to let you know So for those of you that might have missed it You're probably wondering have you ever showcased one of these transducers before on your show? I have actually I have a vertical pinball cabinet in my house And I wanted to get that same rumble effect and I installed one in there and it is truly awesome So I'm telling you guys you got to trust me on this one It's gonna make a huge difference and you're really gonna like it. Alright guys, that's it. It's that simple So I think this is going to greatly enhance your experience, right? I was trying to somehow figure out like what's missing and it's these all these older arcade games just had awesome sound systems So you add this transducer? I'm telling you the cool thing is it's gonna give you that feeling and that experience that you want and Everyone else isn't really gonna be affected by it because it's not so much making the room loud It just making you feel it in that you know in the one that using the machine now the one thing I did want to do but I didn have time to do it is I was thinking could I wire two more smaller transducers behind the control panel so I would feel it in the steering wheel it wouldn't be forced feedback but it might give you even more of a sensation that might be taking it too far I'm not sure so if someone else wants to do that and comment below that'd be great the only thing I didn't include in the parts list in the description is a screw kit so you're gonna have to make sure when you put the screw in it needs to go far enough into the seat the first time I did it I didn't put it far enough and the thing actually fell down so you got to make sure it it grabs enough so just get some wood screws play with the lens but you want to make sure it goes into the seat far enough you don't want it to go so far that it like you know stabs your butt but definitely get that thing all up in there all right that's all I got guys if you enjoyed this video give me a thumbs up consider subscribing to the channel turn on notifications to give me informed of future videos like this one and that's it for now guys we will see you all the next one